Product Details
- Amazon Sales Rank: #59286 in Consumer Electronics
- Color: black
- Brand: Mitsubishi
- Model: L75-A91
- Dimensions: 41.70" h x
66.40" w x
15.00" l,
154.00 pounds
- Native resolution: 1920 x 1080
- Display size: 75
Features
- Mitsubishi Exclusive Laser Light Engine
- StreamTV Internet Media
- Cinema Color. 3D Ready
- Plush 1080p 5G 12-Bit Digital Video Processing
- Variable Smooth 120 Film Motion
- Cinema Color with 6-Color Processor
Mitsubishi L75-A91 75-Inch 1080p LaserVue HDTV
Product Description
The Ultimate Large Screen 3D Experience!
Mitsubishi revolutionizes large screen television with groundbreaking Laser Technology. LaserVue® Laser TV sets the New Standard for large screen television by delivering unimaginable, cinema-like color at a fraction of the operating power consumption of similarly-sized flat panel TVs. LaserVue® harnesses the power of the world's purest light source to deliver up to two times the color of many of today's flat panel TVs. Laser beams provide an extensive range of rich, complex colors, truly distinct clarity, and immersive depth of field. It's the ultimate in picture quality, rivaling the amazing color viewed in the most advanced digital cinemas. Breakthrough laser technology creates an eco-friendly portal to a multi-dimensional, intensely real and vivid world. Beyond flat TV, experience True DimensionTM. Mitsubishi LaserVue® TV.
Customer Reviews
Most helpful customer reviews
95 of 100 people found the following review helpful.
By Ernst Steinert
Thank you all for your entries. Reading them was very helpful to me, and I would like to help others by adding what I experienced this past month. Keep in mind I gave this product a full 5-stars because that is exactly what a defect-free L75-A91 deserves. I also posted this review on the AVS Forum, a great resource for home theater. Also, I make no comments about sound. You don't buy a piece of gear like this planning to rely on the internal speakers.I received my Laservue from Walt's on Jan 3. I prepared three years for this decision, starting with considering the 82" DLP, then almost the first 65" Laservue, then waiting for the 75" 2nd generation. I went to see a local Mitsubishi-run demo over a year ago that included the 65" Laservue. A Mits rep handed me a confidential sheet that described the next generation Laservues, and it was an easy decision to wait. Also, I'll give up the extra inches the 82" DLPs provide for the Laservue's elimination of the color wheel and bulb changes.If I want to get a total immersion experience I just plop my butt five feet from the screen at 1080p, and I'm experiencing IMAX! For routine programming 75" looks great from the sofa 10 ft away. One month after my Laservue arrived, I'm happy. But it took a month to get to this point.Now for my purchasing saga...I had plenty of opportunities to view and buy locally. I really wanted the comfort of getting this thing from a reputable dealer just a few miles from my home. Unfortunately that comfort came at an $800 premium (shipping and taxes factored in) over what I found on-line, so I went with Walt's in Phoenix. They treated me just great and I have no complaints whatsoever. They shipped when they promised, and I got regular tracking updates. I was instructed to look for any signs of damage to the shipping carton, and to reject the delivery if anything suspicious could be seen.The truck arrived right on schedule, and the packaging looked absolutely pristine. They even put Mitsubishi's entire package onto a wooden skid, well strapped in the vertical position. I signed and brought my baby home. It was a very cold day, so I just let the whole thing sit in my home for about six hours before uncrating the product. When I opened it up, everything looked perfect.BUTThe moment I turned my Laservue on I knew something was wrong. The red screen logo popped up, but it had a strange shape, angled in from the sides. Sure enough, so did the picture. It filled the screen for about four inches from the top. Then both sides of the picture angled inward symmetrically. The picture height ended about for inches from the bottom of the screen. I also had the infamous "tab shadow" in the upper right corner. Everything worked. What there was of the picture looked great after some tweaking. It was obvious there was severe key-stoning, and I felt it was unlikely the set left the factory that way.BUT I HAVE A SPECIAL LASERVUE HOTLINE...JUST FOR ME!! I registered and called that night, Jan 3, 2011. I listened to the menu choices. Why are they asking me, on a dedicated Laservue hotline, if I want to buy a replacement bulb??? There is no bulb! Hmmm...I got through the menus and waited. My God that music makes me want to strangle the first person I talk to!! But that's not how I treat people, and when someone finally picked up I was a perfect gentleman. It didn't take me long to realize that my "hotline" was a low-level call center outside our beloved US of A (Philippines I later found out.) They try hard, but the point is they can do nothing but pass the info along to the real people that can help us, located in California (customer service) and in Atlanta (tech center). I was promised a call-back the next day.Three days later I got a call, but I missed it and it went to voice-mail. It came from a customer service rep in California, Marcus, but there was no way to return his call, except going to the "hotline" and talking to our Filipino friends. It took forever to get a live body there, listening to that fingernail-on-the-chalkboard music. Finally I got another very nice call-center person, who had no idea who or where Marcus was, but she promised me a callback before the end of the day. Two days later I was talking to Marcus, a wonderful, knowledgeable fellow. He told me he was personally handling my case. I emailed him photos of my issues and he said he would release a work order to my local authorized service center for in-home repair.GREAT NEWS! That service center is superb, friendly, and close. I called them. The owner took care of me personally, and he said he would come as soon as the work order arrived from Mitsubishi. It took three days, and several of HIS phone calls, with the same music-on-hold. to get the work order. BUT WAIT, THERE'S MORE!!!...Mitsubishi wants to brief all service centers working on a Laservue BEFORE they go on the call. This is such new technology that the Atlanta tech center wants to discuss the specifics with the repairman. I think that's wonderful, especially since my Laservue was the first one my center had been called on. One problem... it took another three days for the Atlanta tech center to conduct that briefing. Part of the delay was due to the ice storm that hit Atlanta.When the tech came (it was the owner himself), I was pumped. We're gonna fix this sucker! The "tab shadow" has nothing to do with a tab. Mitsubishi knows all about it and told my guy exactly what to do. (EVERYONE: the "tab shadow" is really just a peeling supplier label on the inside of the screen frame.) He popped the back of the cover at the top corner and there it was, pretty much right where the shadow is located.Then he went into the service menu to adjust the serious geometry problem, per Mitsubishi instructions. He got it better, but ran out of adjustment. Apparently the Mitsubishi Atlanta folks didn't understand just how bad my geometry problem was. He sent them my pictures, and they came back with instructions to replace the light engine assembly, a sealed unit that contains the chip and it's mirror). They shipped a replacement part 2nd-day air. The next day the tech switched it out and performed the mechanical alignment with the adjustment screws holding the assembly. You get those as close as possible, then do the fine adjustment electronically. He got it a LOT better, but ran out of mechanical adjustment. The best he could do was get rid of most of the key-stoning, and get the whole picture within an inch of the bottom. My Spears and Munsil test pattern still showed significant bowing on the right side.Marcus called. Mitsubishi determined that my Laservue needs to be replaced. This was initiated within 24hrs, and I received full tracking info all along the way. The TV came direct from Mitsubishi's tech center in Atlanta. (I had chosen early on NOT to involve Walt's because this was really Mitsubishi's problem. Walt's did nothing wrong; we did communicate during all this).Mitsubishi provided white glove delivery, and the service was top notch. It was a very cold day and I really did not want to turn the set on right away, but I had to. My Spears and Munsil test pattern was ready to go, and when I turned the TV on the geometry was absolutely perfect. I signed and the delivery guys took the old TV and all the packaging away. As expected, the picture was foggy for a while from condensation on the mirrors, but I could see it improve and after about two hours the picture was perfectly clear. I did some cursory display adjustments with my Spears and Munsil Blu-ray disk. The only thing I noticed is that the factory over-scan setting could be decreased a tad in all directions. Not messing with the service menus until my new Oppo BDP-95 player arrives.I got my original purchase on 1/3. A month later I have a perfect replacement. Perfect geometry out of the box. No "tab shadow." And oh by the way, my old TV "stuttered" too when watching cable, but this new one does not do that.LESSONS/THEORIES:DON'T EVEN THINK OF BUYING A LASERVUE FROM A NON-AUTHORIZED DEALER. (Walt's is authorized.)The "tab shadow" is a part label that should be removed on the assembly line because the adhesive on it doesn't always hold.I believe my "stuttering" was caused by a poor HDMI #1 connection. The cable fits much more snuggly on my new set than on my old.I am convinced, as a degreed engineer, that these TVs don't travel well. I believe a bad pothole hit by the truck can knock these things out with no visible outward signs. They have to turn them on before they leave the factory. I can't believe mine was passed there. I have no worries now that my baby is home, but I believe our poor stretches of interstate can do them in. Walt shipped mine via Yellow Freight. It came through Kansas City to St. Louis, traveling one of the worst sections of I-70, in an ordinary trailer. The replacement from Atlanta was on an "air-ride" suspension truck, the kind used to transport $million medical machines.There seems to be a communication lag between Mitsubishi USA and their call center in the Philippines.NOW THAT EVERYTHING IS RIGHT, I WOULD NOT TRADE THIS LASERVUE FOR ANY OTHER TV I HAVE SEEN. Are you thinking about 3D? You will not get the true effect without a very large screen, and this TV is the best way to get a gorgeous, LARGE image. You'll need the adapter Mitsubishi sells. It works great and takes care of any "future-proof" issues. Also, read up on AVS forums about 3D glasses.Happy Super Bowl Everyone!
57 of 59 people found the following review helpful.
By Darby Rose
When Mitsubishi introduced their 65" version of this set, my husband fell in love. We first saw it at a Los Angeles showroom a year ago, and I had a very hard time dragging him out the door. The minute we got home to Florida, he started tracking the information being provided on the "soon to be introduced" 75" version. First, it would be by Christmas, then spring. Finally, Mitsubishi introduced it in August - a long wait, but well worth it.I'm not a techie, so can't begin to elaborate on the amazing features of this awesome HDTV, but if you are looking for a really big screen television, with 3-D like clarity (it is 3D ready) don't hesitate to buy this set. It will make your home the center of football season, with or without the popcorn and beer!The folks at Amazon were very helpful - I think we may have placed the first order for the Mitsubishi L75-A91 that they received. Their "white glove" delivery service was exactly what they said it would be. It took 2 burly (but polite) guys to carry in this set, take it out of the box, and plug it in, and they did so exactly within the time-frame we requested at the time we placed our order. Our hat's are off to Amazon - this was definitely the biggest online purchase we ever made, but it went smoothly, without a hitch. And I have a very happy husband!The only "con" that I can think of is that this dlp HDTV is 15" deep, and weighs about 150 pounds, so you can't hang it on the wall. If having a wall-hung TV is more important to you than the picture quality, you'll need to look at a different product. For us, the picture quality, and the fact that our last Mitsubishi lasted 15 years (we just gave it away to make room for this big guy) made this purchase worth the money.
33 of 34 people found the following review helpful.
By DanL
Just got the 75inch Laservue out of the box and did a quick setup. Connected up the Sony BDPS5000ES blue ray player. The blue people in Avatar never look as healthy on this planet. The scale is like nothing I have ever seen, the degree of clarity is a shock (the entire Picture Area is without blemish) We spent most of the evening looking for some detraction, could not find a single element of problem. Yes its expensive but having spent much more over many years of TV buying this is, with out a shadow of doubt, the best we have ever seen. I have nothing but praise for what Mitsubishi has accomplished with this unit. Engineers, THANK YOU.
This Page is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED "AS IS" AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Great picture, awful sound
Sony KDL 32bx320
