Product Details
- Amazon Sales Rank: #35166 in Home Theater
- Size: 55-Inch
- Color: black
- Brand: Panasonic
- Model: TC-P55VT30
- Dimensions: 33.40" h x
15.30" w x
52.40" l,
98.20 pounds
- Native resolution: 1920 x 1080
- Display size: 55.1
Features
- Full HD 3D (1 Pair of Glasses Included)
- It has one sheet of glass design
- It has Infinite Black Pro 2 panel
- It has VIERA Connect Wi-Fi Ready
- It has THX 3D Certified Display
Panasonic VIERA TC-P55VT30 55-inch 1080p 3D Plasma HDTV, Black
Product Description
Panasonic VIERA TC-P55VT30 55-Inch 1080p 3D Plasma HDTV
Customer Reviews
Most helpful customer reviews
141 of 151 people found the following review helpful.
Best TV currently on the market.
By Jigsore
I had researched for about a year or so before placing a pre-order for this set. In 2010 I purchased a 55 inch Samsung C8000 LED set, and had bad luck with two units which were unrepairable, and needed to be replaced. Finally I got one without a problem, and it looked pretty great with bright content, but in blacked out scenes, or letterbox content there was a "flashlight" and cloud effect that was just too distracting. This is in a completely dark room by the way. It was at this point that I decided I was going to buy the best TV on the market with little regard to cost, and almost everything I read led to the upcoming VT30. So I placed my order in April, and the set was delivered on May 13th. Immediately I was blown away by the picture quality of this set, but also noticed a "flicker" effect, almost like the picture was fluttering on the high contrast scenes. For about the first month of owning the set I can't tell you how much reading and research I did to see if there was a way to fix this flicker problem, and although there is a lot of info on the web about this set, it seems like nobody was addressing the flicker issue. So I thought it must just be me, but then I found an article that talked about the greyscale of PDP technology, and that it can cause flicker which only some people see. I know that my vision is good, but could this be a problem with Plasma? Is it just me? Is it the settings of the set? Well, it couldn't be the latter, because I had tried just about every settings combination possible, and nothing had worked. When the contrast was turned down low it did reduce the flicker effect, but never went away and made the picture too dim to really enjoy. The picture quality on this was so good that I was heartbroken to think that it would go back because of this issue, after all, for this kind of money I expect near perfect results as I don't make this kind of purchase every day. So before returning the set I bit the bullet, and forked out the money to have a professional calibrator come out and adjust the settings in the TV's Service Menu. This is a menu that you can access with the proper codes, and is intended only for professionals to tweak the color, greyscale, light output, etc. on the set. Turns out that the set needed the calibration badly. I have never had a professional calibration on a TV before this, and although I figured that it would be a good idea, I never realized just how much difference it could make! The picture quality was already the best I had ever seen, but after professional calibration it is absolutely mind blowingly good! The flicker is gone, the picture is bright, but subtle, and tons of detail in the shadows. Black areas of a scene are pitch black, and colors are incredibly accurate. I almost want to miss work just to stay home and watch TV now. I have Comcast HD, and although it is pretty good in my neighborhood, you just can't beat a Blu-Ray on this thing. In fact, the calibrator that dialed in my TV has a Pioneer Kuro, and has calibrated up to an 11 Million dollar home theater, and his opinion is that there are a lot of great sets to choose from with Panasonic, Samsung, LG, etc, but he agrees that the VT30 is the best you can get right now. If you can afford it, I highly suggest that you take a good look at this TV before you make the leap. By the way, the Samsung LED that I referenced above is now in a bright room, and looks phenomenal. The Samsung D8000 is a pretty awesome set for 2011, and until the calibration I thought I was going to end up that direction, but it also has the flicker effect, and I have had bad luck with two Samsung TV's, and two of their Blu-Ray players in the past. Not sure how reliable they are this year, but I'm pretty sure that the Panasonic was the right choice.Update: The fluctuating brightness issue on these sets that some people are talking about was on a small number of the initial units released. It has been addressed, and fixed. You will not have a problem with fluctuating brightness from this point forward. Also, I saw the new Elite sets from Sharp and the VT30 is still definitely the king of the mountain. Go see for yourself and I'm sure you'll agree.
55 of 58 people found the following review helpful.Final review -- success.
By PeterUbers
I was reluctant to purchase this tv as are/were many secondary to the fluctuating brightness.My amazon TV is an August 2011 build. A previous amazon customer who wrote a review here mentioned his recently acquired (sept 2011) tv was a July build. amazon, on the phone, could not guarantee me any build date, I guess I got luck of the draw on August, which apparently all August and beyond tv's have a replaced A board from the factory -- there is changing information on this on the 'net forums.I was also a bit reluctant to purchase from Amazon, as I've never purchased something this expensive online before, but I've purchased from Amazon for years and have ZERO negative to say about Amazon reliability and service -- it's always been impecable.I received this this tv only 2 days after I purchased it from Amazon, it arrived in great condition, my wife was home and she didn't know to ask the gentlemen who delivered it to put it on the stand, but they did not offer to do this for us. They turned it on, made sure it worked, and left (they just removed the top part of the box, pulled the styrofoam wrap down a bit, and plugged it in).I got home, plugged in the wifi, updated firmware from 2.060 to 2.070 witout any problems.I must admit -- for the purpose of this review -- so far I have not done any major testing. I currently own a Panny TC-P65S2 (2010) and came from a Panny TC-P65S1, and have only owned panasonic plasmas. I have dealt with fluctuating black levels (and am annoyed by them) on the S2, and the VT30 was a great prospect when I heard about the great black levels, apparently stable (thus far in reports from professional testing, i.e. cnet).I'll report back as I start playing around with this thing. I gave it 5 stars because I did not want to lower the average rating.I can already tell the black levels are much better than the S2, the one sheet of glass is very cool, it's 1/2 or 1/3 the depth of my s2 -- very thin for a 65" plasma. The brushed aluminum trim is also a nice touch.Oh, and no buzz compared to my S2 .. my S2 can get rather loud, but this thing has no significant buzz - you can hear a little when you're a few feet away from it.******Final review:My EEPROM number is 84.46 .. this is an August build, Serial MJ1214XXXXX. This has the updated a board/firmware, because I see NO FBr (fluct. brightness)Performance -- stellar (compared to my previous panasonic plasmas).This is clearly, without the 9G Kuro on the market, the king of plasmas. I hope all purchasing from Amazon get the August build or beyond. When I called Amazon, they could not guarantee me that, but they would guarantee that they'd return it no charge if I was not satisfied in 30 days. Nothing touches Amazon's no tax price right now.Colors, black levels, "pop" .. all amazing.Sure, it's not a Kuro, but it's 90% there, and that says something. I thought my S2 black levels were terrible once I got the tv and started using it. For someone who will be doing dark room watching and CARES about black levels, fluctuating brightness, fluctuating black levels -- here's your tv.Thanks for reading.Update (all good) 11/28/11:This TV continues to impress me -- rock stable black levels and on brightness fluctuation issues (see my report above). Will definitely continue to stay with panny for plasma as currently their plasma is the best on the market. Time to get an oppo blu-ray player.
27 of 27 people found the following review helpful.Plasma For Life - VT30 is a Winner
By ha-evolution
This is my first plasma tv and I am pleasantly surprised. I did plenty of research before buying this tv and everything I read about this Panasonic VT30 series was correct. It has wonderful blacks and can get plenty bright in certain modes. I was somewhat concerned about the brightness issue given that my past flat panels have all been LCD. I admit I was a fan of the overblown brightness modes that LCD's allow but it is far from the most accurate picture and affects black levels. I had previously purchased a Samsung D8000 edge lit LED LCD but sent it back to Amazon because of the uneven back-lighting. This TV shows no uniformity issues (as expected with plasma technology). Watching sports on the Panny is great and 3D looks awesome also. Black levels are amazing - there is no black crush that I can discern and I have barely adjusted any settings on the TV.The styling of the VT30 series is a definite plus. I was considering the cheaper ST series but after I seeing the huge ugly bezel I couldn't settle for old school looks. The VT one sheet of glass look is very well executed. The panel is also slimmer than I was expecting considering this is a plasma. Also I have to note that there is no fan noise and no plasma buzzing which other plasmas brands are known for (Samsung).The Panasonic VT30 is a keeper.
This Page is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED "AS IS" AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
